Efectivamente, en estos equipos lo mejor es ir a las especificaciones del fabricante y deben estar en los manuales del equipo.
Las referencias que encontre, no tenian la especificacion del aceite, solo el periodo de cambio y la recomendacion de no mezclar el viejo con el nuevo aceite.
Hay una advertencia que no conocia: que el aceite puede salir a gran presion por una fuga y para removerlo se necesita cirugia.
esta es una buena razon para usar el EPP completo al usar la herramienta.
suerte !!, algun otro forista podria publicarlo si tiene la misma Lukas y del mismo tipo (presion)
7.4 Hydraulic oil supply
LUKAS motor/engine pump or hand pump is used for operating the devices.
If the power pack comes from a manufacturer other than LUKAS, it must be ensured
that it fulfils the LUKAS specifications, as otherwise dangers may occur for which
LUKAS cannot be held liable. Especially it has to be made sure that the permissible
working pressure of 63 MPa (630 bar) is not exceeded.
13.2.4 Change of hydraulic oil
- after 200 uses, latest after 2 years, the hydraulic oil has to be changed.
- in any case if the oil of the pump (motor / hand pump) which belongs to the unit is
changed. By changing the used oil, it should be avoided that the new oil is polluted
by the used oil of the rescue tool.